steel form

Design and application of steel form jumbo in inclined shaft

钢模台车在斜井工程中的设计与应用

Due to failure on thermal wear and thermal fatigue basis, which is in the con-crete presented in the form of wear and network crack, the consumption of retained mandrel of AISC Seamless Steel Pipe Plant is very large.

鞍钢无缝钢管厂狄舍尔轧管机的限动芯棒消耗量很大，主要的失效形式为热磨损与热疲劳，具体表现为磨损和网裂。

The sulphuric acid has eaten into these steel pipes. Thaumasite form of sulfate attack of cementitious materials

硫酸已腐蚀了这些钢管。水泥基材料碳硫硅钙石型硫酸盐腐蚀

Design drawings and then dried dried, printed on thick white paper to form a work plan, work plan will be glued to steel or titanium plate, copper plate on.

然后把设计图稿晒干风干，印在厚的白纸上，形成工作图，将工作图粘在钢板或钛金板、铜板上。

This thesis firstly introduced the properties, the history and the base form of Steel Reinforced Concrete ( SRC).

本文简要介绍了型钢混凝土（SRC）结构的特点，SRC结构的发展史及SRC结构的基本类型。

As a popular form of light steel structures , gabled frame is widely used at present.

门式刚架是口前轻钢结构中应用最广泛的一种钢结构形式.

Nowadays the steel is sometimes cast into its semifinished form directly from molten state.

现在钢有时可直接从熔化状态铸成''.'毛坯'.''.

Design for steel form jumbo of TGP power source station and application

三峡电源电站尾水洞施工钢模台车设计及应用

Nowadays the steel is sometimes cast into its semifinished form directly from its molten state.

现在钢有时可直接从熔化状态铸成毛坯.

The application of combination steel form work in continuous box beam

组合钢制大模板在连续箱梁中的应用

The light steel form jack plane manufactured by themselves has been used in pouring of the lining concrete, which not only improves the quality and progress of the project, but also decreases the cost.

在衬砌混凝土浇筑时由于采用自行加工的轻型钢模台车，不仅提高了工程质量和进度，而且降低了成本。

New technology preventing float of steel form of lining jumbo in tunnels

隧道钢模台车衬砌施工中预防模板浮动新工艺

3' Dec 2001, the PRC in due form to join to WTO, Iron and steel industry is an industry which complete on-limits. it cause to a challenge and opportunity compete environment.

2001年12月3日，我国正式加入世界贸易组织，钢铁工业是我国加入世贸组织后全面开放的行业，因此一个挑战与机遇并存的全新的竞争环境，已经来到我们面前了；

The result shows that with the increment of excavation depth and the application of steel support, the deformation state of the retaining piles gradually develops form the anteverted curve towards foundation pit to bow curve and the place of Maximum horizontal displacement also move down.

监测结果表明：随着基坑开挖深度的增加和钢支撑的施加，围护桩的变形形态由向坑内的前倾型曲线逐渐变为弓形，最大水平位移发生的位置也随之下移。

In this paper, the failure form of work roll bearing chock of2050mm hot strip mill in bao steel is studied using Finite Element Method ( FEM) the internal heat resources of bearing system is analyzed.

本文以宝钢2050热连轧机工作辊轴承座热变形故障为研究对象，详细分析了轴承系统的内热源，确认轴承内部的摩擦热是轴承升温的主要热源。

Adopt combined steel form work supported by steel pipes as the external form work the foundation.

基础的外模采用组合钢模板、钢管支撑,模板的支设应牢固可靠、拼缝严密,模板表面应刷隔离剂.